MIL-C-24308 - MIL-DTL-24308 D-SUB

MIL-C-24308 - MIL-DTL-24308 D-SUB

MIL-DTL-24308 D-Sub connector

Sub D, HE 501, HE507, HE508 Connector ex stock
MIL-C-24308 - MIL-DTL-24308 D-SUB connectors from stock. MIL-KABEL-SYSTEMS is the specialist for D-Sub connectors especially designed for military and aerospace applications and often delivers them from stock. Especially the D-Sub connectors from Souriau and ITT Cannon meet the most important international standards. Depending on the version, the series are NF C 93425, MIL-C-24308, HE 501, HE507 and HE 508 approved. The HE 501 Sub-D connectors are equipped with turned crimp contacts and are suitable for cable cross-sections AWG20/24 or AWG26/28. The same applies to the HE 508 Sub-D connectors, which are also resistant to temperatures up to +155 degrees Celsius. These connectors are often found in 9, 15, 25, 37 and 50 poles under the order numbers 8630.09P, 8630.09S, SEMA09PN, SEMA09PLN, 8630,15P, 8630.15S, 8630.25P, 8630.25S, 8630.37P, 8630.37S, 8630 .50P and 8630.50S from Souriau in stock at MIL-KABEL-SYSTEMS. We also frequently supply these D-Sub connectors on short notice as a high pin count version, fitted with 15, 26, 44, 62 and 78 AWG22 crimp contacts in the standard 9, 15, 25, 37 and 50 pin housings. They can be ordered optionally in a sealed version with sealing pad and/or surface sealing in the interface.

Accessories for D-Sub connectors
Of course, MIL-KABEL-SYSTEMS also offers the appropriate accessories for all Sub-D connectors. We deliver from stock D-Sub metal hoods, D-Sub plastic hoods, locking bolts, sliding locks, dust protection caps and mounting brackets.

Manufacturer for MIL-DTL-24308 D-Sub connector:
Amphenol, ITT Cannon, Phoenix Contact, Souriau, TE Connectivity

Applications HE501, HE507, HE508 Connectors
In civil and military aviation , defense and aerospace applications, D-Sub connectors to MIL-DTL-24308, HE501, HE507 and HE508 provide secure connections in aircraft, helicopters and missiles.

Applications for Sub-D MIL connectors
MIL-D-Sub connectors from MIL-KABEL-SYSTEMS are used in communication systems, cabin equipment, lighting, measuring devices for pressure and temperature, radar equipment, data control and board computers.

Crimping tools for MIL D-Sub connector
For crimping the D-Sub MIL terminals you need the M22520/1-01, M22520/2-01 M22520/7-01 crimping pliers and the matching positioners. MIL-KABEL-SYSTEMS also supplies the matching M22520 manual crimping tools, pneumatic crimping tools, M22520 crimping pliers and M81969 press-in tools / M81969 press-out tools for all common MIL connectors. Thus, the crimp contacts of the manufacturers Amphenol, ITT Cannon, Souriau and TE Connectivity can be processed safely and perfectly.

Heat shrinkable tubing and heat shrinkable fittings for HE501, HE507, HE508 connectors
MIL-KABEL-SYSTEMS supplies aviation approved VG95343 shrink tubing and molded shrink parts for D-Sub connectors. These shrink tubings from the defense equipment standard VG95343 meet the highest safety standards and are often delivered by us from stock or within a few days.

Cable assemblies with MIL-DTL-24308 connectors
Are you looking for a cable assembler who can supply you with ready-made MIL connectors and MIL cables for aerospace and defense applications? Then you are right with us! We are the cable assembler with almost 20 years of experience and manufacture cable assemblies according to your requirements with different connectors and cables.

Typical part numbers for MIL-DTL-24308 connectors
8630.09P, 8630.09S, SEMA09PN, SEMA09PLN, 8630.15P, 8630.15S, 8630.25P, 8630.25S, 8630.37P, 8630.37S, 8630 .50P, 8630.50S

Let's talk about your requirements! We support you with our know-how!