VG95343 Heat shrink tubing from stock

Mould shrink parts for airplanes, ships, railroads, and helicopters

We supply VG95343 heat shrinkable tubing promptly from stock. As sealing and strain relief for all industrial and military circular connectors with molded adapters, you will find the entire range of VG95343 shrink molded parts and VG9343 shrink tubing at MIL-KABEL-SYSTEMS. The high quality products from the suppliers TE Connectivity / Tyco / Raychem promise the best possible protection. All these heat shrink tubing and molded shrink parts reliably seal the transition between cable and connector. High-tech materials are suitable for use in different temperature ranges and ensure hazard-limiting features for this purpose. They are insensitive to environmental influences due to optimum thermal and mechanical resistance. Tyco / TE Connectivity / Raychem heat shrinkable tubing is suitable for temperatures ranging from -75 °C to 260 °C. Shrink ratios range from 2:1 to 8:1 as they are made of PVDF, radiation crosslinked PE, elastomers, ZH, silicone, and are specified according to UL, MIL, CSA, VW-1, VG and PAN.

Heat shrinkable tubing for aviation, military, navy and railroad
The heat shrinkable tubing from the VG95343 standard is frequently used in the aerospace, military, railroad, marine and safety engineering sectors, as it meets the highest quality and safety requirements. MIL-KABEL-SYSTEMS is also your specialist in shrink technology. We offer a wide range of different VG95343 heat shrinkable tubing. With the shrink tubings of the series ATUM, CGAT, CGPT, RNF100, RNF 3000, RT375 and RW175 we offer an optimal solution for every application. We supply the VG9343- heat shrinkable tubing in many lengths and colors, as thin, medium and thick wall versions, fast shrinking, and adhesive coated. Tell us your requirements and we will find the right shrink tubing for you!

VG95343 Heat Shrink Tubing Manufacturer
Raychem/TE Connectivity/Tyco, HellermannTyton

Series and Standards for VG95343 Heat Shrink Tubing for MIL Connectors
For shrinking in areas of industrial electronics, railroad, marine and also for the aviation connectors from the specifications PAN ( = Panavia ), ABS ( = Airbus ), BACC ( = Boeing ), ASN-E ( = Aerospatiale ), EN ( = European Standard ) and ESC ( = Rolls-Royce ) we supply VG95343 shrink tubing. These shrink sleeves are ideally suited for the MIL/Aero connectors of the military standards MS, MIL-C-26482 I, MIL-C-26482 II, MIL-C-38999 I, MIL-C-38999 II MIL-C-38999 III, MIL-C-38999 IV, MIL-C-5015 MIL-C-83723 III and the defense equipment standards VG95234, VG95328, VG96912 and VG96918.

Applications VG95343-Heatshrink Tubing
In commercial and military aerospace, military, defense, railroad, aerospace and marine applications, VG95343 heat shrink molded parts on circular connectors to MIL, VG, MS, PAN, ABS, BACC, ASN, EN and ESC standards provide secure seals between connectors and cables. Commonly used in aircraft, helicopters, ships railroads and satellites.

Applications for VG95343 heat shrink tubing
VG95343 heat shrink tubing is shrunk onto many MIL/Aero connectors and industrial connectors. They are used in drives, communications systems, cabin equipment, lighting, pressure and temperature gauges, radar equipment, landing gear, and board computers.

Cable assemblies for VG95343 heat shrink tubing
Are you looking for a cable assembler who will professionally shrink tubing onto adapters of round connectors and cables and deliver them ready-made? Then you are right with us! We are the cable assembler with almost 20 years of experience and manufacture cable assemblies according to your requirements with different connectors and cables.

Typical ordering designations for VG95343 heat shrink tubing
DR25 1/2-0, DR25 1/4-0, DR25 1/8-0, DR25 3/8-0, DR25 3/16

Delivery time
Ex stock or very short term

Let's talk about your requirements! We support you with our know-how!